This deep groove ball bearing, constructed from aerospace-grade Titanium Grade 5, offers superior corrosion resistance and lightweight performance for critical power transmission applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 64mm |
| Outside Diameter | 82mm |
| Width | 34mm |
Built to exacting engineering tolerances, this Grade 5 Titanium deep groove ball bearing boasts an inside diameter of 64mm, an outside diameter of 82mm, and a width of 34mm. The exceptional strength-to-weight ratio and inherent passivity of Titanium Grade 5 make this bearing ideal for operation in corrosive, high-temperature, or chemically aggressive environments where traditional steel bearings would degrade. Its precision design ensures smooth, low-friction rotation, crucial for maintaining efficiency in demanding power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free of debris. 2. Carefully press or lightly tap the bearing into its designated housing or onto the shaft, applying even pressure to the outer or inner race respectively. 3. Verify the bearing rotates freely and without undue resistance after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the bearing during installation, potentially deforming the races or cages. | Use a bearing press or a correctly sized drift to apply force only to the race that is being fitted. |
| Installing a dirty bearing, which can lead to premature wear and reduced lifespan. | Clean both the bearing and its mating surfaces thoroughly before assembly, preferably in a controlled environment. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, Medical Equipment (MRI, X-ray machines), Chemical Processing Pumps and Mixers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||