Engineered for extreme environments, this Grade 5 Titanium deep groove ball bearing offers superior corrosion resistance and lightweight performance. Ideal for critical power transmission in aerospace, marine, and chemical processing.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 64mm |
| Outside Diameter | 153mm |
| Width | 41mm |
Specified by design engineers worldwide, this deep groove ball bearing boasts an internal diameter of 64mm and an external diameter of 153mm, with a bearing width of 41mm. Constructed from aerospace-grade Titanium Grade 5, it provides exceptional strength-to-weight ratio, superior corrosion resistance against harsh chemicals and saltwater, and operates effectively across a wide temperature range. Its robust design ensures high load capacity and extended service life in demanding industrial power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surfaces are clean and free from debris. 2. Apply a light coating of compatible lubricant to the shaft and bearing bore. 3. Carefully press the bearing onto the shaft using a hydraulic press or appropriate bearing heater, ensuring even pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper lubrication selection | Utilize a lubricant specifically rated for titanium and the operating temperature and load conditions. |
| Overtightening of shaft or housing | Adhere to specified torque values for mounting hardware to prevent premature bearing wear or distortion. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, Marine Propulsion Systems, Chemical Processing Pumps, High-Performance Automotive Drivetrains.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||