Engineered from aerospace-grade Titanium Grade 5, this deep groove ball bearing delivers exceptional corrosion resistance and strength-to-weight ratio for demanding industrial power transmission.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 62mm |
| Outside Diameter | 186mm |
| Width | 17mm |
Purpose-built for heavy-duty applications, this deep groove ball bearing boasts an inner diameter of 62mm, an outer diameter of 186mm, and a width of 17mm. Constructed from Titanium Grade 5 (Ti-6Al-4V), it offers superior tensile strength, fatigue resistance, and exceptional performance in highly corrosive or extreme temperature environments where conventional steel bearings would fail. This material's inherent lightness also contributes to reduced inertial forces in high-speed applications. Its design allows for high radial and axial loads, making it suitable for critical power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the correct race. 3. Verify smooth rotation and proper seating before proceeding with assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the outer race when pressing onto a shaft. | Always apply force to the inner race when mounting on a shaft and to the outer race when mounting into a housing to prevent brinelling. |
| Improper lubrication leading to premature wear. | Use a lubricant specifically recommended for Titanium bearings and the operating environment. Ensure correct fill levels are maintained. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace actuators, Chemical processing equipment, High-performance automotive differentials.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||