This high-performance deep groove ball bearing, forged from aerospace-grade Titanium Grade 5, delivers exceptional strength-to-weight ratio and unparalleled corrosion resistance for critical power transmission applications.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 62mm |
| Outside Diameter | 109mm |
| Width | 30mm |
Manufactured under strict quality controls, this deep groove ball bearing features a 62mm bore diameter, a 109mm outer diameter, and a 30mm width. Constructed from Titanium Grade 5 (Ti-6Al-4V), it provides excellent mechanical properties including high tensile strength, low density, and superior resistance to aggressive media and high temperatures, far exceeding standard steel bearings. Its precise geometry ensures smooth operation, reduced friction, and extended service life even in demanding operational conditions, making it suitable for aerospace, marine, and chemical processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully mount the bearing onto the shaft, applying even pressure to the inner ring, avoiding impact to the outer ring. 3. If press-fitting, use appropriate tools to achieve a snug fit without overstressing the bearing. 4. Position the shaft with the bearing into the housing, ensuring proper alignment and seating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft mounting. | Always apply force exclusively to the inner ring when mounting onto the shaft to prevent damage to the raceways and rolling elements. |
| Using contaminated tools or environment during installation. | Maintain a clean environment and use clean, dedicated tools to prevent premature wear and contamination of the bearing surfaces. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, High-Corrosion Marine Environments, Chemical Processing Pumps and Mixers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||