Engineered for critical applications, this deep groove ball bearing features a robust Grade 5 Titanium construction. It offers exceptional strength-to-weight ratio and superior corrosion resistance for demanding power transmission needs.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 12mm |
| Outside Diameter | 45mm |
| Width | 49mm |
Built to exacting engineering tolerances, this deep groove ball bearing boasts an internal diameter of 12mm and an external diameter of 45mm. The bearing width is precisely 49mm. Constructed from Grade 5 Titanium (Ti-6Al-4V), it provides outstanding strength, exceptional corrosion resistance in aggressive chemical and saltwater environments, and a high operating temperature capability compared to standard steel bearings. This makes it ideal for aerospace, medical equipment, and marine applications where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully press the bearing onto the shaft, applying even force to the inner race. 3. Mount the housing, ensuring the outer race is seated correctly without excessive force. 4. Verify smooth rotation and proper fit before full load application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer race during shaft mounting. | Always apply mounting force exclusively to the inner race when pressing onto the shaft to prevent brinelling and internal damage. |
| Over-tightening of housing or shaft retention components. | Ensure proper torque specifications are followed for housing and shaft retention to avoid premature bearing wear or seizure. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, Medical Imaging Equipment, Marine Propulsion Systems, High-Performance Automotive Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||