Engineered from aerospace-grade Titanium Grade 5, this deep groove ball bearing delivers exceptional performance in corrosive and high-stress power transmission systems, ensuring reliability and longevity.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 61mm |
| Outside Diameter | 103mm |
| Width | 36mm |
Designed for demanding industrial environments, this deep groove ball bearing features an inside diameter of 61mm, an outside diameter of 103mm, and a width of 36mm. Constructed from Titanium Grade 5 alloy, it provides a superior strength-to-weight ratio, exceptional corrosion resistance against aggressive chemicals and saltwater, and excellent fatigue life, making it ideal for aerospace, marine, chemical processing, and high-performance machinery where traditional steel bearings would fail.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free of debris. 2. Carefully align the bearing with the shaft and housing. 3. Apply a light, even pressure to seat the bearing fully, avoiding excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation | Utilize a bearing press or carefully applied, even pressure to avoid damaging the races or cages. |
| Inadequate lubrication for the operating environment | Consult the bearing manufacturer's recommendations for appropriate lubricant type and re-greasing intervals based on speed, load, and environmental factors. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, Marine Propulsion and Steering, Chemical Processing Pumps and Mixers, High-Performance Electric Motors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||