This premium deep groove ball bearing, crafted from aerospace-grade Titanium Grade 5, offers exceptional corrosion resistance and high strength-to-weight ratio for critical power transmission applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 59mm |
| Outside Diameter | 172mm |
| Width | 42mm |
Specified by design engineers worldwide, this deep groove ball bearing features an inside diameter of 59mm, an outside diameter of 172mm, and a width of 42mm. Constructed from Titanium Grade 5 (Ti-6Al-4V), it exhibits superior strength, lightweight properties, and remarkable resistance to corrosion and extreme temperatures, making it ideal for demanding environments where traditional steel bearings would fail. Its precise internal geometry ensures smooth operation and extended service life under significant radial and axial loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing and shaft surfaces are clean and free from debris. 2. Apply a thin layer of appropriate lubricant to the shaft and the inner ring of the bearing. 3. Carefully press the bearing onto the shaft using a suitable arbor press or bearing installer, applying even pressure to the inner ring.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the outer ring during shaft mounting. | Always apply mounting force to the inner ring when fitting a bearing onto a shaft to prevent damage to the raceways and balls. |
| Using improper lubrication, leading to premature wear. | Consult the bearing manufacturer's recommendations for the correct lubricant type and viscosity for the operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace actuators and control systems, Medical equipment requiring biocompatibility and corrosion resistance, Chemical processing pumps and mixers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||