Engineered for extreme environments, this Grade 5 Titanium deep groove ball bearing offers superior strength-to-weight ratio and exceptional corrosion resistance, ensuring reliable performance in critical power transmission systems.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 42mm |
| Outside Diameter | 76mm |
| Width | 28mm |
Specified by design engineers worldwide, this deep groove ball bearing is precision-manufactured from Ti-6Al-4V Titanium Grade 5 alloy, renowned for its biocompatibility, exceptional strength, and low density. With an inner diameter of 42mm, outer diameter of 76mm, and a width of 28mm, it provides robust load-bearing capacity while minimizing weight. This material selection makes it ideal for applications requiring high reliability and resistance to harsh chemical or environmental conditions, such as aerospace, medical equipment, and high-performance industrial machinery where traditional steel bearings may degrade.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean, smooth, and free from burrs. 2. Carefully align the bearing with the shaft and housing before applying seating force. 3. Use appropriate press-fit tooling or induction heating for precise and even installation to avoid brinelling.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft mounting. | Always apply mounting force to the inner ring when installing onto the shaft to prevent damage to the raceways. |
| Improper lubrication selection for the operating environment. | Consult lubrication charts for Titanium Grade 5 bearings, considering temperature, speed, and potential for chemical ingress. Ensure clean application of lubricant. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, High-Speed Industrial Spindles, Medical Device Robotics.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||