This high-performance deep groove ball bearing, crafted from Titanium Grade 5, delivers exceptional corrosion resistance and strength-to-weight ratio. Engineered for demanding power transmission applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 98mm |
| Outside Diameter | 27mm |
| Width | 25mm |
A proven choice for industrial professionals, this deep groove ball bearing features an inside diameter of 98mm, an outside diameter of 27mm, and a width of 25mm. Constructed from Titanium Grade 5, it exhibits superior tensile strength, fatigue resistance, and excellent performance in corrosive or high-temperature environments. Its lightweight yet robust nature makes it suitable for applications where weight reduction and material integrity are paramount, such as aerospace, marine, and chemical processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft, applying even force to the inner ring only. 3. Mount the housing, ensuring proper alignment before securing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft mounting. | Always apply force exclusively to the inner ring when mounting onto the shaft to prevent brinelling and damage. |
| Over-tightening or under-tightening mounting fasteners. | Use a torque wrench to tighten mounting fasteners to the manufacturer's specified torque values for optimal performance and longevity. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, Corrosive Chemical Pumps, High-Speed Marine Propulsion.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||