Engineered for extreme conditions, this Grade 5 Titanium deep groove ball bearing offers unparalleled corrosion resistance and a high strength-to-weight ratio. Ideal for corrosive, high-temperature, or vacuum environments where performance is critical.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 53mm |
| Outside Diameter | 31mm |
| Width | 25mm |
Purpose-built for heavy-duty applications, this deep groove ball bearing utilizes Grade 5 Titanium (Ti-6Al-4V) for its exceptional strength, low density, and superior resistance to corrosion, even in aggressive chemical or saline environments. With an inside diameter of 53mm, an outside diameter of 31mm, and a width of 25mm, it provides robust radial and axial load support. The inherent non-magnetic properties and high operating temperature capabilities of titanium make this bearing suitable for specialized industrial machinery, aerospace components, and medical equipment requiring extreme reliability and purity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing housing and shaft are clean and free from debris. 2. Apply a thin, even layer of appropriate lubricant to the shaft and inner ring raceway. 3. Carefully press the bearing onto the shaft, ensuring it seats fully and squarely. Avoid hammering directly on the bearing. 4. Install the bearing into the housing, verifying proper clearance and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or cage damage. | Use a bearing press or induction heater for controlled installation. Apply force to the ring being mounted, not across the bearing. |
| Contaminating the bearing during handling or installation. | Wear clean gloves and handle the bearing in a clean environment. Keep bearing packaging sealed until ready for installation. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuators, Chemical Processing Pumps, Medical Equipment Drives.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||