Engineered for extreme environments, this deep groove ball bearing utilizes Grade 5 Titanium for superior strength-to-weight and corrosion resistance. Its precise dimensions ensure optimal performance in critical power transmission systems.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 52mm |
| Outside Diameter | 173mm |
| Width | 27mm |
Specified by design engineers worldwide, this Grade 5 Titanium deep groove ball bearing offers an exceptional combination of mechanical properties. With an inside diameter of 52mm, outside diameter of 173mm, and a width of 27mm, it provides robust support and low friction. The inherent biocompatibility and corrosion resistance of Titanium Grade 5 make it ideal for applications requiring extreme durability and resistance to aggressive media or high temperatures. Its lightweight nature further enhances efficiency in aerospace, medical equipment, and chemical processing machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surfaces are clean and free from debris. 2. Apply a thin, even layer of appropriate lubricant to the bearing races and balls. 3. Carefully press the bearing into its housing or onto its shaft, ensuring perpendicular alignment to avoid brinelling.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper lubrication for the operating environment. | Consult the lubrication compatibility chart for Titanium Grade 5 bearings and the specific application conditions (temperature, speed, load). |
| Applying excessive force during installation, leading to brinelling. | Utilize a bearing press or induction heater for controlled installation. Ensure the force is applied evenly to the ring being pressed, not through the balls. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, High-Speed Centrifuges, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||