Engineered from aerospace-grade Titanium Grade 5, this deep groove ball bearing offers exceptional strength-to-weight ratio and corrosion resistance. Its robust design ensures reliable performance in demanding industrial environments.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 33mm |
| Outside Diameter | 84mm |
| Width | 12mm |
A high-performance industrial component, this deep groove ball bearing is meticulously manufactured from Titanium Grade 5 alloy, renowned for its superior strength, low density, and excellent corrosion resistance, particularly in aggressive chemical and high-temperature environments. With an inside diameter of 33mm, an outside diameter of 84mm, and a width of 12mm, it is precision-engineered for optimal load distribution and reduced friction. This bearing's unique material properties make it an ideal choice for applications requiring reduced weight, enhanced fatigue life, or operation in environments where traditional steel bearings would degrade.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the correct race. 3. Verify smooth rotation and proper seating before full system engagement.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying impact force directly to the bearing outer ring during installation into a shaft. | Always apply force to the race that is being pressed. For shaft mounting, apply force to the inner ring; for housing mounting, apply force to the outer ring. |
| Over-greasing or using incompatible lubricants. | Use the recommended lubricant type and amount as specified for the application and operating conditions to avoid excessive heat and premature failure. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, Chemical Processing Equipment, High-Performance Automotive Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||