Engineered for extreme environments, this Titanium Grade 5 deep groove ball bearing offers exceptional strength, corrosion resistance, and lightweight performance. Its robust construction ensures reliability under significant loads and harsh operating conditions.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 50mm |
| Outside Diameter | 185mm |
| Width | 24mm |
Purpose-built for heavy-duty applications, this deep groove ball bearing features an Inside Diameter of 50mm, an Outside Diameter of 185mm, and a Width of 24mm. Constructed from Grade 5 Titanium alloy, it provides superior strength-to-weight ratio, excellent corrosion resistance against aggressive media, and a higher operating temperature tolerance compared to standard steel bearings. This makes it ideal for aerospace, marine, chemical processing, and high-performance automotive applications where material integrity and longevity are paramount. The bearing's design ensures efficient load distribution and smooth rotational performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free of contaminants. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the correct ring (inner for shaft, outer for housing). 3. Verify free rotation after installation and check for any signs of binding or excessive noise.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force directly to the rolling elements during installation. | Always apply installation force to the ring that is being pressed into its seat (inner ring onto shaft, or outer ring into housing) using appropriate tools like a bearing press or induction heater. |
| Contaminating the bearing surfaces during handling and installation. | Handle the bearing with clean, lint-free gloves and avoid exposing the raceways and rolling elements to dirt, dust, or corrosive substances before and during installation. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, Marine Propulsion and Steering, Chemical Processing Equipment, High-Performance Automotive Drivetrains.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||