This premium Deep Groove Ball Bearing, crafted from Titanium Grade 5, offers exceptional corrosion resistance and a superior strength-to-weight ratio for critical power transmission systems.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 52mm |
| Outside Diameter | 94mm |
| Width | 14mm |
A high-performance industrial component, this Deep Groove Ball Bearing features a 52mm inner diameter, 94mm outer diameter, and a 14mm width. Constructed from Titanium Grade 5 (Ti-6Al-4V), it provides outstanding corrosion resistance against aggressive environments and exhibits a significantly higher strength-to-weight ratio than traditional steel bearings. This makes it ideal for applications requiring reduced mass without compromising structural integrity or performance under extreme conditions. Its design ensures efficient radial and axial load handling, contributing to extended operational life in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing and housing surfaces are clean and free of debris. 2. Carefully press the bearing into its designated housing, applying even force to the outer ring. 3. For shaft mounting, apply gentle, even force to the inner ring, ensuring it is seated flush.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force directly to the balls during installation. | Always apply mounting force to the bearing races (inner or outer ring) to avoid damaging the rolling elements. |
| Improper lubrication leading to premature wear. | Ensure the correct type and amount of lubricant, as specified for the operating environment and load conditions, is applied before and during operation. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace actuators, Medical equipment, Marine propulsion systems, High-performance automotive components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||