Engineered from aerospace-grade Titanium Grade 5, this deep groove ball bearing offers exceptional strength-to-weight ratio and superior corrosion resistance for critical power transmission systems.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 42mm |
| Outside Diameter | 35mm |
| Width | 31mm |
Manufactured under strict quality controls, this deep groove ball bearing features an inside diameter of 42mm, an outside diameter of 35mm, and a width of 31mm. Constructed from Titanium Grade 5 (Ti-6Al-4V), it exhibits excellent fatigue strength, high tensile strength, and outstanding resistance to corrosive environments, including saltwater and aggressive chemicals. This material composition makes it ideal for applications where weight reduction and material integrity under extreme conditions are paramount, ensuring reliable performance and extended service life in demanding power transmission scenarios.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surfaces are clean and free from debris. 2. Carefully align the bearing with the shaft and housing, applying even pressure during insertion to avoid cocking. 3. Secure the bearing using appropriate retaining rings, collars, or press fits as per design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper alignment during installation, leading to premature wear and brinelling. | Verify that the bearing is perfectly square with the shaft and housing bore before applying any force. |
| Over-tightening retaining components, causing excessive pre-load and reduced bearing life. | Refer to torque specifications or use appropriate bearing setting gauges to achieve the correct pre-load. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace actuators, Marine propulsion systems, High-performance automotive drivetrains, Medical equipment with sterilization requirements, Chemical processing machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||