Engineered for superior performance in corrosive and high-stress environments, this Grade 5 Titanium deep groove ball bearing offers unmatched durability and reliability for critical power transmission systems.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 48mm |
| Outside Diameter | 63mm |
| Width | 42mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an inside diameter of 48mm, an outside diameter of 63mm, and a width of 42mm. Constructed from Titanium Grade 5 (Ti-6Al-4V), it delivers exceptional strength-to-weight ratio, superior corrosion resistance against aggressive media, and high operating temperature capabilities. Its robust design ensures smooth operation and longevity in applications where material integrity and performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure. 3. Verify proper seating and axial/radial clearance as per system design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper lubrication application. | Ensure the bearing is lubricated with the specified grease or oil, avoiding over or under-greasing. |
| Excessive force during installation. | Use a bearing press or appropriate tooling for installation to avoid damaging the bearing races or rolling elements. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, Chemical Processing Equipment, High-Performance Automotive Drivetrains.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||