Engineered from aerospace-grade Titanium Grade 5, this deep groove ball bearing delivers exceptional strength-to-weight ratio and corrosion resistance for critical power transmission systems. Optimized for high loads and demanding environments.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 45mm |
| Outside Diameter | 94mm |
| Width | 17mm |
Built to exacting engineering tolerances, this deep groove ball bearing features a precise 45mm inside diameter, a 94mm outside diameter, and a 17mm width. Constructed from Titanium Grade 5 (Ti-6Al-4V), it offers outstanding tensile strength, fatigue resistance, and superior performance in corrosive or high-temperature environments. Its robust construction ensures reliable operation under significant radial and axial loads, making it suitable for aerospace, marine, and specialized industrial machinery where weight reduction and material integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing and housing surfaces are clean and free from debris. 2. Carefully press the bearing into the housing using an appropriate bearing installer or arbor press, applying force evenly to the outer ring. 3. Install the shaft into the bearing, applying even force to the inner ring. Ensure proper seating without excessive hammering.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong ring during installation. | Always apply installation force to the ring that is being fitted; outer ring to housing, inner ring to shaft. |
| Using improper tools or excessive force, leading to brinelling or damage. | Utilize dedicated bearing installation tools and ensure force is applied gradually and evenly. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace propulsion systems, High-performance automotive drivelines, Specialized marine equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||