This premium deep groove ball bearing, constructed from aerospace-grade Titanium Grade 5, offers exceptional corrosion resistance and a lightweight profile for high-performance power transmission systems.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 44mm |
| Outside Diameter | 172mm |
| Width | 14mm |
Specified by design engineers worldwide, this deep groove ball bearing features a precise 44mm bore diameter, a 172mm outer diameter, and a 14mm width. Manufactured from Titanium Grade 5 alloy, it provides unparalleled strength-to-weight ratio, exceptional resistance to corrosive environments, and excellent thermal stability. This makes it the superior choice for applications demanding reduced rotational mass and reliable operation in harsh conditions, including aerospace, marine, and chemical processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully align the bearing with the shaft and housing. 3. Apply appropriate lubricant and press the bearing into place using a controlled, even force. Avoid hammering.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto the shaft or into the housing without proper alignment. | Always ensure precise alignment of the bearing with both the shaft and housing before applying any force. Use a bearing press or induction heater for controlled installation. |
| Using excessive force, leading to brinelling or damage to the raceways. | Employ a bearing installer tool or appropriate press. Apply force uniformly to the ring that fits tightly (usually the inner ring on a shaft). Never hammer the bearing. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, High-Performance Marine Propulsion, Chemical Processing Pumps and Mixers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||