Engineered for extreme environments, this Grade 5 Titanium deep groove ball bearing offers superior corrosion resistance and lightweight strength for critical power transmission systems.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 42mm |
| Outside Diameter | 47mm |
| Width | 11mm |
A proven choice for industrial professionals, this deep groove ball bearing is meticulously manufactured from Titanium Grade 5, renowned for its exceptional strength-to-weight ratio and unparalleled resistance to corrosive media, including saltwater and many aggressive chemicals. With an inside diameter of 42mm, an outside diameter of 47mm, and a width of 11mm, this bearing is ideal for applications requiring reduced mass and enhanced durability in challenging operating conditions. Its design ensures efficient radial and axial load support in applications such as aerospace, marine equipment, and specialized chemical processing machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Apply a thin, even layer of appropriate lubricant to the bearing's outer ring and shaft. 3. Carefully press the bearing onto the shaft or into the housing, applying force uniformly to the outer ring (for press-fit in housing) or inner ring (for press-fit on shaft).
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force directly to the cage during installation. | Always apply installation force to the ring (inner or outer) that is being press-fit. |
| Improper lubrication, leading to premature wear. | Use only recommended lubricants for Titanium Grade 5 bearings and ensure proper fill levels. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, Marine Propulsion Components, High-Performance Chemical Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||