This advanced deep groove ball bearing, constructed from aerospace-grade Titanium Grade 5, delivers exceptional performance under corrosive conditions and elevated temperatures. Its precisely machined dimensions ensure smooth, reliable operation in critical power transmission systems.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 40mm |
| Outside Diameter | 119mm |
| Width | 12mm |
A high-performance industrial component, this deep groove ball bearing boasts a 40mm inside diameter and a 119mm outside diameter, with a 12mm width. Fabricated from Titanium Grade 5, it exhibits superior strength-to-weight ratio, exceptional corrosion resistance against a wide range of chemicals and saltwater, and excellent thermal stability up to 600°C. These properties make it ideal for demanding applications in aerospace, marine environments, chemical processing, and high-performance automotive systems where conventional steel bearings would degrade prematurely. The material's inherent non-magnetic nature also lends itself to specialized instrumentation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean bearing and housing with a suitable degreaser. 2. Apply a light, even coating of approved lubricant to the bearing raceways and sealing surfaces. 3. Carefully press the bearing into its designated housing or onto its shaft, ensuring perpendicularity to prevent misalignment and brinelling.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-lubrication or under-lubrication. | Refer to manufacturer's specifications for correct lubricant type and fill volume. Over-lubrication can cause churning and heat build-up; under-lubrication leads to premature wear. |
| Improper mounting, leading to misalignment or axial preloading. | Ensure press-fit tolerances are within specified limits and that mounting forces are applied evenly to the race, not the cage. Use appropriate bearing installation tools. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, Marine Propulsion and Steering Components, High-Temperature Chemical Processing Equipment, Medical Device Rotors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||