Engineered with aerospace-grade Titanium Grade 5, this deep groove ball bearing offers exceptional strength-to-weight ratio and superior corrosion resistance. Ideal for high-performance power transmission systems requiring durability and reduced mass.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 48mm |
| Outside Diameter | 117mm |
| Width | 46mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an inner diameter of 48mm, an outer diameter of 117mm, and a width of 46mm. Constructed from Titanium Grade 5 (Ti-6Al-4V), it exhibits excellent tensile strength, fatigue resistance, and is virtually immune to most corrosive environments, including saltwater and aggressive chemicals. Its low density (approx. 4.5 g/cm³) significantly reduces inertial loads, making it suitable for high-speed applications and weight-sensitive machinery where performance and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating shaft and housing surfaces are clean and free from debris. 2. Carefully align the bearing with the shaft, avoiding any tilting. 3. Apply controlled, even pressure to the inner ring during installation onto the shaft.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft mounting. | Always apply installation force exclusively to the inner ring when mounting onto the shaft to prevent brinelling and internal damage. |
| Improper lubrication leading to premature wear. | Use a high-quality, compatible lubricant specified for the operating temperature and load conditions. Ensure even distribution within the bearing raceways. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, High-Performance Automotive Drivetrains, Medical Equipment Robotics.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||