This deep groove ball bearing, crafted from aerospace-grade Titanium Grade 5, delivers exceptional performance in demanding environments. Its lightweight, high-strength, and corrosion-resistant properties make it ideal for critical power transmission applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 57mm |
| Outside Diameter | 173mm |
| Width | 10mm |
A high-performance industrial component, this deep groove ball bearing boasts an Inside Diameter of 57mm, an Outside Diameter of 173mm, and a Width of 10mm. Constructed from Titanium Grade 5 (Ti-6Al-4V), it offers an unparalleled strength-to-weight ratio and exceptional resistance to a wide spectrum of corrosive media, including saltwater and many acids. This material choice significantly reduces operational mass while maintaining robust load-bearing capabilities. Its design is optimized for radial and axial loads, ensuring smooth and reliable operation in applications where standard steel bearings would fail due to material degradation or weight constraints.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Apply a thin, even layer of appropriate lubricant to the bearing raceways and balls. 3. Carefully press the bearing into the housing, ensuring squareness and even pressure application, or slide onto the shaft using a guided method.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during press-fitting, leading to brinelling or deformation. | Utilize a hydraulic press or a bearing installation kit with appropriate sleeves and apply pressure only to the outer ring when installing into a housing, or the inner ring when mounting on a shaft. |
| Contaminating the bearing during installation, compromising its performance and lifespan. | Handle the bearing with clean, lint-free gloves and ensure the installation environment is free from dust and other particulate matter. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, Marine Equipment, High-Performance Chemical Processing Machinery, Medical Devices requiring non-magnetic, corrosion-resistant components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||