Engineered for extreme environments, this deep groove ball bearing features a Grade 5 Titanium construction, offering superior corrosion resistance and reduced weight for critical power transmission applications.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 36mm |
| Outside Diameter | 124mm |
| Width | 46mm |
Specified by design engineers worldwide, this deep groove ball bearing boasts an internal diameter of 36mm, an external diameter of 124mm, and a width of 46mm. Constructed from aerospace-grade Titanium Grade 5, it exhibits exceptional strength-to-weight ratio, remarkable resistance to corrosive media, and a wide operating temperature range. Its advanced material properties make it ideal for applications requiring high reliability in harsh or chemically aggressive conditions, such as in marine, aerospace, and chemical processing industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surfaces on the shaft and housing are clean and free from burrs or debris. 2. Apply a light coating of appropriate lubricant to the shaft and the inner ring of the bearing. 3. Carefully press the bearing onto the shaft, ensuring it seats squarely and without excessive force. Use a bearing press or appropriate induction heater for optimal results.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overheating during press-fitting. | Utilize induction heating with precise temperature control or a hydraulic press with controlled pressure to avoid thermal damage to the titanium. |
| Contamination during handling. | Handle the bearing in a clean environment, using lint-free gloves to prevent contamination of the races and rolling elements. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, Marine Propulsion Systems, Chemical Pump Drives, High-Speed Centrifuges.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||