Engineered for extreme environments, this Deep Groove Ball Bearing utilizes high-performance Titanium Grade 5 for exceptional strength, corrosion resistance, and reduced weight in critical power transmission systems.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 34mm |
| Outside Diameter | 155mm |
| Width | 18mm |
A proven choice for industrial professionals, this Deep Groove Ball Bearing features an inside diameter of 34mm, an outside diameter of 155mm, and a width of 18mm. Constructed from Titanium Grade 5, it offers superior strength-to-weight ratio, exceptional corrosion resistance against aggressive media, and non-magnetic properties, making it ideal for aerospace, marine, and chemical processing industries. Its robust design ensures reliable performance under high loads and extreme temperatures where conventional steel bearings would fail.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free of debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the correct ring. 3. Verify free rotation and check for any binding or excessive noise before full load application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying impact force directly to the bearing outer ring when mounting onto a shaft. | Apply force only to the inner ring when mounting on a shaft, and only to the outer ring when mounting into a housing. |
| Using improper lubrication or insufficient lubrication for the operating environment. | Consult lubrication charts and select a lubricant compatible with Titanium Grade 5 and the specific operating conditions (temperature, speed, load). |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, Marine Propulsion Shafts, High-Performance Chemical Pumps, Medical Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||