This premium deep groove ball bearing, constructed from aerospace-grade Titanium Grade 5, offers exceptional strength-to-weight ratio and superior corrosion resistance for critical power transmission systems.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 50mm |
| Outside Diameter | 132mm |
| Width | 35mm |
Trusted by engineers across multiple sectors, this deep groove ball bearing is precision-manufactured from Titanium Grade 5 (Ti-6Al-4V), renowned for its excellent biocompatibility, high tensile strength, and exceptional corrosion resistance, particularly in aggressive environments. With an inside diameter of 50mm, an outside diameter of 132mm, and a width of 35mm, it is engineered for reliability in demanding applications such as aerospace actuators, medical equipment, and high-performance industrial machinery where weight reduction and material integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean bearing and mating shaft/housing thoroughly. 2. Apply a thin, uniform layer of appropriate lubricant to bearing raceways and balls. 3. Carefully press the bearing onto the shaft or into the housing, ensuring even force distribution and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing during installation, leading to race deformation or ball spalling. | Use a proper bearing press or induction heater for controlled mounting, ensuring alignment and avoiding impact loads. |
| Incorrect lubricant selection or insufficient lubrication, causing premature wear and heat buildup. | Consult bearing manufacturer's lubricant recommendations based on operating speed, temperature, and load conditions. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, Medical Device Drives, High-Performance Industrial Gearboxes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||