Engineered from aerospace-grade Titanium Grade 5, this deep groove ball bearing offers exceptional strength-to-weight ratio and unparalleled corrosion resistance, ensuring reliable performance in extreme environments.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 55mm |
| Outside Diameter | 81mm |
| Width | 46mm |
Built to exacting engineering tolerances, this Grade 5 Titanium deep groove ball bearing boasts an internal diameter of 55mm, an external diameter of 81mm, and a width of 46mm. The inherent properties of Titanium Grade 5, including its high tensile strength, excellent biocompatibility, and resistance to a wide range of corrosive media, make this bearing ideal for applications where weight reduction, galvanic corrosion prevention, or exposure to aggressive chemicals is a concern. Its robust construction ensures optimal load distribution and smooth rotational dynamics under demanding operational conditions, contributing to extended equipment lifespan and reduced maintenance requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing surfaces are clean and free from debris. Apply a thin layer of appropriate lubricant to the shaft and housing bores. 2. Carefully press the bearing onto the shaft, ensuring it is seated squarely and without excessive force. Utilize a bearing installer tool if necessary. 3. Gently insert the shaft assembly into the housing, allowing the outer ring of the bearing to seat fully without undue pressure on the cage or balls.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during press-fitting, potentially damaging the bearing races or balls. | Utilize a properly sized bearing installer tool or a hydraulic press with controlled pressure. Ensure the force is applied evenly to the ring being pressed. |
| Contaminating the bearing surfaces with dirt, debris, or improper lubricants during installation. | Work in a clean environment. Inspect bearing seals and housing before installation. Use only manufacturer-recommended lubricants, applied sparingly. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, Chemical Processing Equipment, High-Performance Automotive Drivetrains, Medical Device Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||