Engineered for superior performance, this deep groove ball bearing utilizes Titanium Grade 5 for exceptional strength, lightweight design, and outstanding corrosion resistance. Ideal for critical power transmission systems.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 28mm |
| Outside Diameter | 21mm |
| Width | 34mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an inside diameter of 28mm, an outside diameter of 21mm, and a width of 34mm. Constructed from Titanium Grade 5 alloy, it offers superior tensile strength, fatigue resistance, and remarkable immunity to corrosive environments, significantly outperforming traditional steel bearings in harsh conditions. Its lightweight nature makes it suitable for aerospace and high-speed rotational applications where mass reduction is paramount, ensuring reliable operation under substantial loads and extreme temperatures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surfaces are clean and free of debris. 2. Apply a thin layer of appropriate lubricant to the shaft and bearing bore. 3. Carefully press the bearing onto the shaft, ensuring even force distribution, until it is fully seated against the shoulder.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during press-fitting, leading to brinelling or deformation. | Utilize a hydraulic or mechanical press with appropriate tooling to apply controlled, even force to the bearing's inner ring only. |
| Contamination of the bearing during installation, compromising lubrication and performance. | Handle bearings with clean, lint-free gloves and install in a controlled, clean environment. Keep bearing packaging sealed until immediate use. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, High-Speed Robotic Arms, Marine Propulsion Systems, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||