This precision-engineered deep groove ball bearing, crafted from aerospace-grade Titanium Grade 5, offers exceptional performance. Its unique material properties ensure superior corrosion resistance and high strength-to-weight ratio for critical power transmission systems.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 28mm |
| Outside Diameter | 80mm |
| Width | 23mm |
A high-performance industrial component, this deep groove ball bearing boasts an inside diameter of 28mm, an outside diameter of 80mm, and a width of 23mm. Fabricated from Titanium Grade 5 (Ti-6Al-4V), it exhibits unparalleled resistance to corrosive environments, extreme temperatures, and fatigue. This alloy's inherent strength and low density make it ideal for applications where weight reduction and robust operational integrity are paramount, ensuring extended service life and reliable performance under demanding loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean, flat, and free from debris. 2. Carefully align the bearing with the shaft and housing, avoiding any impact. 3. Apply appropriate lubrication and secure the bearing using a press fit or locking mechanism, following manufacturer guidelines.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or deformation. | Utilize a controlled press fit or induction heater for installation, ensuring even pressure distribution. |
| Using incorrect or insufficient lubrication, causing premature wear and overheating. | Consult the bearing manufacturer's lubrication chart for the specific operating conditions and apply the recommended lubricant grade and quantity. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace actuators, High-performance automotive drivetrains, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||