This premium deep groove ball bearing, crafted from aerospace-grade Titanium Grade 5, offers exceptional strength-to-weight ratio and superior corrosion resistance. Engineered for high-performance power transmission in challenging conditions.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 24mm |
| Outside Diameter | 75mm |
| Width | 17mm |
Specified by design engineers worldwide, this deep groove ball bearing features an inside diameter of 24mm, an outside diameter of 75mm, and a width of 17mm. Constructed from Titanium Grade 5 (Ti-6Al-4V), it provides outstanding tensile strength, fatigue resistance, and extreme corrosion resistance, particularly in aggressive chemical or marine environments. Its lightweight nature, coupled with the inherent material properties, makes it ideal for applications where weight reduction and long-term reliability are paramount. This bearing excels in demanding operational conditions, offering reduced friction and extended service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing bore and shaft are clean and free from debris. 2. Apply a light film of appropriate lubricant to the shaft and inner ring. 3. Carefully press the bearing onto the shaft until it is fully seated against the shaft shoulder.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning of mating surfaces. | Thoroughly clean both the bearing bore and the shaft before installation to prevent contamination and ensure proper fit. |
| Using excessive force during mounting. | Apply force only to the ring being mounted (inner ring on shaft, outer ring in housing) to avoid damaging the bearing raceways or balls. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, Marine Propulsion and Steering, High-Performance Electric Motors, Medical Equipment, Chemical Processing Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||