Engineered for extreme environments, this Titanium Grade 5 deep groove ball bearing offers superior corrosion resistance and a high strength-to-weight ratio. Ideal for critical power transmission applications where reliability is paramount.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 23mm |
| Outside Diameter | 155mm |
| Width | 9mm |
Manufactured under strict quality controls, this deep groove ball bearing boasts a 23mm inner diameter, a 155mm outer diameter, and a 9mm width. Constructed from Titanium Grade 5 (Ti-6Al-4V), it provides exceptional corrosion resistance, high tensile strength, and a lower density compared to steel bearings. This makes it suitable for applications involving aggressive chemicals, high temperatures, or weight-sensitive systems in industries such as aerospace, medical equipment, and marine environments, ensuring prolonged operational life and reduced maintenance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing bores are clean and within specified tolerances. 2. Apply a thin film of appropriate lubricant to the bearing raceways and rolling elements. 3. Carefully press or slide the bearing onto the shaft, ensuring even pressure distribution, then mount into the housing, again ensuring even seating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper lubrication leading to premature wear. | Use the recommended lubricant type and quantity for the operating conditions and re-lubricate at specified intervals. |
| Applying excessive force during installation, damaging raceways. | Use appropriate press tools and ensure controlled, even pressure is applied only to the ring being fitted (inner ring on shaft, outer ring in housing). |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, High-Performance Marine Equipment, Medical Device Rotors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||