Engineered from aerospace-grade Titanium Grade 5, this deep groove ball bearing offers exceptional corrosion resistance, high strength-to-weight ratio, and superior performance in demanding environments.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 71mm |
| Outside Diameter | 117mm |
| Width | 38mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing features an inner diameter of 71mm, an outer diameter of 117mm, and a width of 38mm. Constructed from Titanium Grade 5 (Ti-6Al-4V), it exhibits remarkable resistance to a wide range of corrosive media, including saltwater, acids, and many industrial chemicals. Its inherent lightness and high tensile strength make it ideal for applications where weight reduction is critical, such as aerospace, marine, and specialized industrial machinery. The material's excellent biocompatibility also lends itself to medical equipment and food processing. Operating temperature range is significantly wider than traditional steel bearings, often exceeding 400°C depending on lubrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free of contaminants. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the outer or inner ring, respectively. 3. Verify smooth rotation and proper seating before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the balls during mounting. | Always apply mounting force to the ring that is being pressed onto its mating component (inner ring on shaft, outer ring in housing). |
| Contaminating the bearing during installation. | Handle the bearing with clean hands or appropriate tools, and ensure the mounting environment is dust-free. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, Chemical Processing Pumps, High-Temperature Marine Equipment, Medical Device Robotics, Lightweight Industrial Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||