Engineered for extreme environments, this Deep Groove Ball Bearing utilizes high-strength Titanium Grade 5. Its precise dimensions and superior material properties ensure reliable, low-friction performance in critical power transmission systems.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 48mm |
| Outside Diameter | 70mm |
| Width | 17mm |
Trusted by engineers across multiple sectors, this Deep Groove Ball Bearing features an Inside Diameter of 48mm, an Outside Diameter of 70mm, and a Width of 17mm. Constructed from Titanium Grade 5, it offers exceptional strength-to-weight ratio, remarkable corrosion resistance against aggressive media, and operates effectively across a wide temperature range. This makes it ideal for applications demanding both high performance and durability, such as aerospace, medical equipment, and chemical processing machinery where traditional steel bearings would degrade.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surfaces are clean, free of debris, and precisely machined to the specified tolerances. 2. Apply a thin, even layer of approved lubricant to both the bearing inner and outer ring raceways. 3. Carefully press the bearing onto the shaft using a calibrated press or induction heater, ensuring even force application and axial alignment. Alternatively, if mounting into a housing, press the outer ring into the housing bore with equal care.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overheating during installation via thermal expansion. | Utilize controlled induction heating or a bearing heater set to the manufacturer's recommended temperature and duration to avoid material degradation. |
| Contamination of bearing raceways with debris or improper lubricant. | Maintain a cleanroom environment during installation and use only manufacturer-specified, compatible lubricants. Inspect raceways visually before mounting. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuators, Medical Imaging Equipment, Chemical Processing Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||