Engineered from advanced Titanium Grade 5, this deep groove ball bearing offers exceptional strength-to-weight ratio and superior corrosion resistance for critical power transmission systems.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 19mm |
| Outside Diameter | 66mm |
| Width | 12mm |
Manufactured under strict quality controls, this deep groove ball bearing features an inside diameter of 19mm, an outside diameter of 66mm, and a width of 12mm. Constructed from Titanium Grade 5 (Ti-6Al-4V), it exhibits outstanding biocompatibility, excellent fatigue strength, and high resistance to a wide range of corrosive environments, including saltwater and aggressive chemicals. Its low density further contributes to reduced system weight. Ideal for aerospace, medical equipment, and high-performance industrial machinery where reliability and environmental resilience are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing bore and shaft thoroughly to remove any debris or lubricant. 2. Carefully mount the bearing onto the shaft, ensuring a snug fit without excessive force. 3. Secure the bearing using appropriate retaining rings or housings, verifying proper alignment and axial play.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening mounting hardware, leading to brinelling or deformation of bearing races. | Use torque-controlled tools and follow manufacturer-specified torque values for all mounting components. |
| Introducing contaminants during installation, compromising bearing performance and lifespan. | Work in a clean environment and handle the bearing with clean, lint-free gloves. Avoid contact with dirt, dust, or other foreign particles. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, High-Performance Marine Equipment, Medical Robotics and Surgical Instruments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||