Engineered for extreme environments, this Titanium Grade 5 deep groove ball bearing offers unparalleled corrosion resistance and high strength-to-weight ratio. Optimized for demanding power transmission applications.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 19mm |
| Outside Diameter | 144mm |
| Width | 46mm |
Built to exacting engineering tolerances, this deep groove ball bearing boasts an internal diameter of 19mm, an external diameter of 144mm, and a width of 46mm. Fabricated from aerospace-grade Titanium Grade 5 (Ti-6Al-4V), it exhibits exceptional strength, superior corrosion resistance against aggressive media, and a significantly lower density compared to steel alternatives. These properties make it ideal for high-performance applications where weight reduction and environmental resilience are critical, such as in marine propulsion systems, chemical processing equipment, and aerospace actuations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing housing and shaft surfaces are clean and free from debris. 2. Apply a thin, uniform layer of approved lubricant to the shaft and inner ring raceway. 3. Carefully press the bearing onto the shaft or into the housing, applying force evenly to the inner or outer ring respectively, avoiding impact on the opposite ring.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force directly to the bearing cage during installation. | Apply installation force uniformly to the inner ring when mounting on the shaft, and to the outer ring when mounting in the housing. Utilize appropriate press tools. |
| Using improper lubrication, leading to premature wear or seizure. | Consult the bearing manufacturer's recommendations for compatible lubricants, considering operating speed, temperature, and environmental factors. Apply the specified quantity. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Marine Propulsion Systems, Aerospace Actuators, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||