This Deep Groove Ball Bearing, crafted from aerospace-grade Titanium Grade 5, offers exceptional corrosion resistance and high strength-to-weight ratio for critical power transmission systems.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 80mm |
| Outside Diameter | 170mm |
| Width | 20mm |
Specified by design engineers worldwide, this 80mm ID x 170mm OD x 20mm width deep groove ball bearing is manufactured from Titanium Grade 5 (Ti-6Al-4V). This advanced alloy provides superior resistance to corrosion in aggressive environments, excellent fatigue strength, and a significantly lower density compared to traditional steel bearings. Its lightweight nature makes it ideal for aerospace, high-performance automotive, and specialized industrial machinery where weight reduction is paramount without compromising operational integrity or load-carrying capacity. The precise internal geometry ensures smooth operation and reduced friction under demanding radial and axial loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from contaminants. 2. Gently press the bearing onto the shaft, ensuring squareness to prevent brinelling. 3. Secure the bearing in the housing using appropriate retaining rings or housings, verifying axial play is within specified tolerances.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during press-fitting, leading to raceway damage. | Utilize a proper bearing installer or press with aligned tooling to distribute force evenly. |
| Contamination of bearing surfaces during installation, compromising lubrication and performance. | Perform installation in a clean environment and handle the bearing with clean, lint-free gloves. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, High-Performance Automotive Drivetrains, Medical Equipment Robotics, Specialized Pump and Compressor Units.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||