Engineered for exceptional performance, this deep groove ball bearing utilizes Titanium Grade 5 for superior strength-to-weight ratio and corrosion resistance. Ideal for critical power transmission applications requiring reliability and reduced mass.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 17mm |
| Outside Diameter | 40mm |
| Width | 10mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an inside diameter of 17mm, an outside diameter of 40mm, and a width of 10mm. Constructed from Titanium Grade 5 (Ti-6Al-4V), it offers exceptional tensile strength, fatigue resistance, and excellent performance in corrosive environments or at elevated temperatures. Its low density makes it ideal for weight-sensitive applications where high operational integrity is paramount. The raceway geometry is optimized for smooth operation and maximum load-carrying capacity within its size class.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surfaces are clean and free of debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure. 3. Verify proper seating and smooth rotation before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or damage. | Use appropriate press tools and apply force only to the ring being fitted (inner ring on shaft, outer ring in housing). |
| Contaminating the bearing during installation or operation. | Handle bearings in a clean environment and ensure seals or shields are intact if present. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, High-Speed Rotating Machinery, Medical Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||