Engineered for extreme environments, this Grade 5 Titanium deep groove ball bearing delivers superior performance. Its high strength-to-weight ratio and exceptional corrosion resistance make it ideal for critical power transmission systems.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 17mm |
| Outside Diameter | 189mm |
| Width | 38mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing boasts an inside diameter of 17mm, an outside diameter of 189mm, and a width of 38mm. Constructed from aerospace-grade Titanium Grade 5, it offers unparalleled strength, excellent corrosion resistance in aggressive media, and a significantly lower density than steel alternatives. These attributes ensure reliable operation and extended service life in applications where weight reduction and chemical inertness are paramount. Typical applications include aerospace actuators, marine propulsion systems, and specialized chemical processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even force to the outer or inner ring respectively. 3. Verify that the bearing rotates freely after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong ring during press-fitting. | Always apply force to the ring that is being mounted (inner ring for shaft mounting, outer ring for housing mounting) to avoid damaging the raceways. |
| Contaminating the bearing during installation. | Handle the bearing with clean hands or appropriate tools, and install it in a clean environment to prevent debris ingress. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, Marine Propulsion, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||