This high-performance deep groove ball bearing, crafted from aerospace-grade Titanium Grade 5, offers exceptional strength, corrosion resistance, and lightweight properties for critical power transmission systems.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 16mm |
| Outside Diameter | 69mm |
| Width | 18mm |
Purpose-built for heavy-duty applications, this deep groove ball bearing boasts an inner diameter of 16mm, an outer diameter of 69mm, and a width of 18mm. Constructed from Titanium Grade 5 (Ti-6Al-4V), it exhibits superior tensile strength, excellent fatigue resistance, and remarkable immunity to corrosive environments, making it ideal for extreme operating conditions. Its low density reduces overall system weight without compromising load-carrying capacity. The raceway geometry ensures efficient load distribution and minimal friction, contributing to extended service life and operational reliability in demanding industrial and aerospace sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surfaces on shaft and housing are clean and free of burrs. 2. Carefully press the bearing onto the shaft or into the housing using appropriate tooling, applying force evenly to the ring being fitted. 3. Verify free rotation and absence of binding after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong ring during press-fitting. | Ensure force is applied to the inner ring when fitting to the shaft and to the outer ring when fitting into the housing. |
| Contaminating the bearing during installation. | Handle the bearing with clean hands or tools and install in a clean environment to prevent debris ingress. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, High-Performance Industrial Gearboxes, Corrosive Environment Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||