This advanced deep groove ball bearing, crafted from aerospace-grade Titanium Grade 5, offers exceptional strength-to-weight ratio and superior corrosion resistance for critical power transmission applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 37mm |
| Outside Diameter | 188mm |
| Width | 44mm |
Engineered for reliability and performance, this deep groove ball bearing features an inside diameter of 37mm, an outside diameter of 188mm, and a width of 44mm. Constructed from Titanium Grade 5, it provides exceptional corrosion resistance, high tensile strength, and a significantly lower density compared to steel bearings. This material choice makes it ideal for environments where weight reduction is paramount or aggressive media are present, ensuring extended service life and consistent operational efficiency in demanding power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seating surfaces are clean, smooth, and free from any contaminants. 2. Carefully align the bearing with the shaft and housing, applying even pressure during installation. 3. Secure the bearing in place using appropriate retaining rings or shaft collars, verifying proper fit and axial play.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper shaft or housing fit leading to premature wear. | Verify shaft and housing dimensions against bearing tolerances to ensure a precise interference or clearance fit. |
| Contamination introduced during handling and installation. | Handle bearings in a clean environment and use clean tools. Keep bearings in their original packaging until ready for installation. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, High-Performance Automotive Drivetrains, Marine Propulsion Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||