Engineered for demanding power transmission, this deep groove ball bearing features a Grade 5 Titanium construction. Offering exceptional strength-to-weight ratio and superior corrosion resistance, it ensures reliable performance in challenging environments.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 12mm |
| Outside Diameter | 156mm |
| Width | 44mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing boasts an inner diameter of 12mm, an outer diameter of 156mm, and a width of 44mm. Constructed from Aerospace-grade Titanium (Ti-6Al-4V), it exhibits superior tensile strength, fatigue resistance, and remarkable lightness compared to steel alternatives. This material composition ensures excellent performance in corrosive atmospheres, extreme temperatures, and high-load applications where weight reduction is critical. Ideal for aerospace, marine, and chemical processing industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free of debris. 2. Apply a thin, even layer of appropriate lubricant to the bearing's inner and outer raceways. 3. Carefully press the bearing into the housing or onto the shaft, applying force uniformly to the ring being fitted, avoiding excessive impact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong ring during installation. | Always apply force to the ring that is being press-fitted. Pressing on the stationary ring can damage the bearing's internal geometry. |
| Using improper lubrication or insufficient lubrication. | Consult the lubricant manufacturer's recommendations for this bearing's application and operating conditions. Insufficient lubrication leads to premature wear. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, High-Performance Marine Equipment, Corrosive Environment Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||