This advanced deep groove ball bearing, forged from aerospace-grade Titanium Grade 5, offers exceptional corrosion resistance and superior strength-to-weight ratio. Ideal for high-stress, corrosive environments where performance is paramount.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 11mm |
| Outside Diameter | 76mm |
| Width | 13mm |
Specified by design engineers worldwide, this deep groove ball bearing boasts an inside diameter of 11mm, an outside diameter of 76mm, and a width of 13mm. Constructed from Titanium Grade 5 (Ti-6Al-4V), it exhibits outstanding tensile strength, fatigue resistance, and remarkable immunity to a wide range of corrosive media, including saltwater and many aggressive chemicals. This material selection ensures extended service life and reduced maintenance in aerospace, marine, medical, and chemical processing industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing using appropriate tooling, ensuring even pressure distribution. 3. Verify proper rotation and absence of binding before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to brinelling or cage damage. | Employ a bearing press or induction heater for controlled, even force application. Never hammer directly on the bearing races. |
| Contaminating the bearing during handling, compromising lubrication and performance. | Handle bearings in a clean environment, keeping them in their original packaging until installation. Avoid direct contact with bare hands. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, Marine Propulsion Components, Medical Equipment Rotors, Chemical Processing Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||