This high-performance deep groove ball bearing, crafted from aerospace-grade Titanium Grade 5, offers exceptional strength-to-weight ratio and superior corrosion resistance for critical power transmission applications.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 11mm |
| Outside Diameter | 50mm |
| Width | 49mm |
Specified by design engineers worldwide, this deep groove ball bearing boasts an internal diameter of 11mm, an external diameter of 50mm, and a width of 49mm. Manufactured from Titanium Grade 5 (Ti-6Al-4V), it exhibits outstanding tensile strength, fatigue resistance, and remarkable inertness to aggressive chemical environments, making it ideal for high-stress, corrosive, or high-temperature operational parameters where traditional bearing materials would fail. Its lightweight nature further contributes to reduced inertial loads in dynamic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. Verify dimensional compliance with specified tolerances. 2. Carefully press the bearing onto the shaft or into the housing using appropriate tooling, applying even pressure to the correct ring (inner or outer). 3. Confirm smooth rotation and secure seating before applying operational load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Incorrect press fit application, damaging the bearing races. | Apply force only to the ring (inner or outer) that is being fitted. Utilize a bearing press or hydraulic press with the correct tooling. |
| Contamination during installation leading to premature wear. | Maintain a clean environment. Handle bearings with clean, lint-free gloves and avoid direct contact with bare hands. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuation Systems, Marine Propulsion Components, Chemical Processing Equipment, High-Speed Robotics.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||