Engineered from high-strength Titanium Grade 5, this deep groove ball bearing offers exceptional corrosion resistance and a lightweight profile for critical power transmission systems. Optimized for reliability in harsh environments.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 11mm |
| Outside Diameter | 124mm |
| Width | 32mm |
Manufactured under strict quality controls, this deep groove ball bearing features an 11mm inside diameter, a 124mm outside diameter, and a 32mm width. Constructed from Titanium Grade 5 (Ti-6Al-4V), it provides superior strength-to-weight ratio, excellent corrosion resistance against aggressive media, and operation across a wide temperature range. Its robust design ensures high load capacity and extended service life in demanding industrial environments where weight reduction and material integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from contaminants. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the outer or inner ring respectively. 3. Verify smooth rotation and proper seating without excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong ring during installation. | Always apply force to the ring being pressed onto its mating component (e.g., inner ring onto shaft, outer ring into housing). |
| Contaminating the bearing during handling. | Keep the bearing in its original packaging until ready for installation and handle with clean, lint-free gloves. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace components, Medical equipment, Corrosive chemical processing machinery, High-performance automotive systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||