Engineered for extreme environments, this deep groove ball bearing utilizes aerospace-grade Titanium Grade 5 for exceptional corrosion resistance and strength-to-weight ratio. Its precise dimensions ensure optimal performance in critical power transmission systems.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 10mm |
| Outside Diameter | 154mm |
| Width | 24mm |
Manufactured under strict quality controls, this deep groove ball bearing features an internal bore diameter of 10mm, an external diameter of 154mm, and a width of 24mm. Constructed from Titanium Grade 5 (Ti-6Al-4V), it offers superior strength, low density, and excellent resistance to aggressive media, making it suitable for corrosive atmospheres, high-temperature applications, and environments where weight is a critical factor. Its robust design ensures reliable operation in demanding power transmission duties.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surfaces are clean and free from debris. 2. Carefully press the bearing onto the shaft using appropriate tooling, applying force evenly to the inner ring. 3. Install the bearing into the housing, again ensuring a precise fit and even pressure distribution on the outer ring.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft mounting. | Always apply mounting force to the inner ring when installing onto the shaft to prevent brinelling of the raceways. |
| Contamination during installation. | Handle bearings with clean hands or gloves and install in a clean environment to prevent premature wear. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace power transmission components, Chemical processing equipment, Marine propulsion systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||