Engineered for extreme environments, this Titanium Grade 5 deep groove ball bearing offers exceptional corrosion resistance, reduced weight, and superior fatigue life for critical power transmission applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 70mm |
| Outside Diameter | 95mm |
| Width | 31mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing features an inside diameter of 70mm, an outside diameter of 95mm, and a width of 31mm. Constructed from Titanium Grade 5 (Ti-6Al-4V), it exhibits remarkable strength-to-weight ratio, exceptional corrosion resistance in aggressive media, and excellent performance at elevated temperatures. Ideal for aerospace, marine, chemical processing, and high-performance automotive systems where traditional steel bearings would fail due to environmental or weight constraints.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing bore are clean and within specified tolerances. 2. Apply a thin, even coat of appropriate lubricant to the bearing races and balls. 3. Carefully press the bearing onto the shaft or into the housing, ensuring perpendicularity. Avoid excessive impact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper lubrication. | Use the manufacturer-recommended lubricant and ensure consistent application during installation and maintenance. |
| Overtightening the shaft or housing. | Adhere strictly to specified mounting torque values to prevent premature bearing failure and distortion. |
A: This Deep Groove Ball Bearing is manufactured from Titanium Grade 5.
A: Aerospace Actuators, Marine Propulsion Systems, Chemical Processing Pumps, High-Speed Motor Shafts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||