Engineered for extreme durability, this industrial O-ring features a Buna-N seal optimized with a robust Titanium Grade 5 construction. It ensures reliable performance in critical applications requiring chemical resistance and mechanical strength.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 8.815" |
| Outside Diameter | 10.285" |
| Cross Section | 0.177" |
A proven choice for industrial professionals, this Buna-N O-ring is manufactured to exacting standards, boasting an Inside Diameter of 8.815 inches, an Outside Diameter of 10.285 inches, and a precise Cross Section of 0.177 inches. The Buna-N (Nitrile Butadiene Rubber) material offers excellent resistance to oils, fuels, and many hydraulic fluids, while the Titanium Grade 5 housing provides superior corrosion resistance, high strength-to-weight ratio, and exceptional durability in harsh operating conditions, making it ideal for aerospace, chemical processing, and high-pressure hydraulic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free from debris. 2. Carefully install the O-ring into the designated groove, avoiding any sharp edges or tools. 3. Apply a light coating of compatible lubricant if necessary to facilitate installation and proper seating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, potentially nicking or cutting the O-ring. | Apply gentle pressure and use a plastic or rubber-tipped tool if needed to guide the O-ring into place. |
| Installing on dirty or damaged mating surfaces, leading to seal failure. | Thoroughly clean and inspect all mating surfaces for imperfections before O-ring installation. |
A: This Industrial O-Ring, Buna-N is manufactured from Titanium Grade 5.
A: High-Pressure Hydraulic Systems, Chemical Processing Equipment, Aerospace Fluid Connectors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||