This industrial O-ring, crafted from robust Titanium Grade 5 and Buna-N, ensures exceptional sealing in demanding environments. Its precisely engineered dimensions provide reliable performance.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 1.256" |
| Outside Diameter | 0.516" |
| Cross Section | 0.131" |
A high-performance industrial component, this O-ring features an Inside Diameter of 1.256 inches, an Outside Diameter of 0.516 inches, and a Cross Section of 0.131 inches. The fusion of Buna-N's excellent oil and fuel resistance with Titanium Grade 5's unparalleled strength, corrosion resistance, and biocompatibility makes this seal ideal for aerospace, medical, and high-pressure hydraulic systems where extreme temperature and chemical exposure are prevalent. Its robust construction guarantees long-term integrity and leak-proof operation under rigorous conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the sealing groove and mating surfaces for cleanliness and absence of debris. 2. Carefully install the O-ring into the groove, ensuring it is not twisted or overstretched. 3. Apply a thin layer of compatible lubricant if recommended for the application to ease installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Gently work the O-ring into the groove without excessive pulling or stretching to maintain its original dimensions and sealing capability. |
| Installing into a dirty or damaged groove. | Thoroughly clean and inspect the groove for any nicks, burrs, or debris that could compromise the seal or damage the O-ring. |
A: This Industrial O-Ring, Buna-N is manufactured from Titanium Grade 5.
A: Aerospace fluid systems, High-pressure hydraulic applications, Medical device seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||