This industrial O-ring combines the robust sealing capabilities of Buna-N with the exceptional strength and corrosion resistance of Titanium Grade 5. Engineered for reliability in critical applications.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 1.865" |
| Outside Diameter | 2.020" |
| Cross Section | 0.268" |
Manufactured under strict quality controls, this Buna-N O-ring features a 1.865-inch inside diameter, a 2.020-inch outside diameter, and a 0.268-inch cross-section. The advanced Titanium Grade 5 construction provides superior tensile strength, fatigue resistance, and excellent performance in aggressive chemical environments and extreme temperatures. Ideal for aerospace, medical, and high-pressure hydraulic systems where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully place the O-ring into the designated groove or gland. 3. Apply a light lubricant compatible with Buna-N and the application environment if necessary.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, potentially nicking or stretching the O-ring. | Handle the O-ring with care and use appropriate tools or lubrication to ease installation without deformation. |
| Installing the O-ring in a contaminated groove or on dirty mating surfaces. | Thoroughly clean all sealing surfaces before O-ring installation to prevent leaks and premature failure. |
A: This Industrial O-Ring, Buna-N is manufactured from Titanium Grade 5.
A: Aerospace Hydraulic Systems, Medical Device Sealing, High-Pressure Fluid Handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||