This industrial O-ring features a durable Buna-N elastomer core, encased in a robust Titanium Grade 5 shell for superior chemical and thermal resistance. Engineered for critical sealing applications where extreme conditions are present.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 3.000" |
| Outside Diameter | 10.037" |
| Cross Section | 0.102" |
Engineered for reliability and performance, this industrial O-ring boasts a precise Inside Diameter of 3.000 inches and an Outside Diameter of 10.037 inches, with a consistent Cross Section of 0.102 inches. The Buna-N elastomer provides excellent resistance to oils, fuels, and hydraulic fluids, while the Titanium Grade 5 casing offers exceptional strength, corrosion resistance, and a wide operating temperature range. This combination makes it ideal for high-pressure, chemically aggressive, and extreme temperature environments, ensuring a leak-free seal in critical industrial systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly dimensioned. 2. Carefully install the O-ring into the groove, avoiding any stretching or twisting. 3. Apply a thin layer of compatible lubricant if necessary for ease of installation and to prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Install the O-ring without excessive tension. The O-ring should fit snugly but not be deformed significantly. |
| Using incompatible lubricants or cleaning agents. | Always verify the compatibility of lubricants and cleaning agents with Buna-N and Titanium Grade 5. Consult material compatibility charts. |
| Installing into a damaged or dirty groove. | Thoroughly inspect and clean the sealing groove before installation. Replace or repair damaged grooves. |
A: This Industrial O-Ring, Buna-N is manufactured from Titanium Grade 5.
A: Aerospace hydraulic systems, Chemical processing equipment, High-temperature industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||