This industrial O-ring, crafted from robust Buna-N and housed within a Titanium Grade 5 casing, offers superior sealing in challenging environments. Its precise dimensions ensure a leak-proof fit for critical applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 3.829" |
| Outside Diameter | 0.794" |
| Cross Section | 0.232" |
Engineered for reliability and performance, this O-ring features an Inside Diameter of 3.829 inches, an Outside Diameter of 0.794 inches, and a Cross Section of 0.232 inches. The Buna-N material provides excellent resistance to oils, fuels, and hydraulic fluids, while the Titanium Grade 5 casing offers exceptional corrosion resistance, high strength-to-weight ratio, and stability across a wide temperature range. This combination makes it ideal for aerospace, marine, and high-pressure fluid systems where material integrity and seal longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully lubricate the O-ring with a compatible lubricant. 3. Gently install the O-ring into the groove, avoiding any stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing a dry O-ring, leading to tearing or premature wear. | Always lubricate the O-ring with a compatible, non-degrading lubricant before installation. |
| Over-stretching or twisting the O-ring during installation, causing deformation and seal failure. | Handle the O-ring with care and ensure it is seated squarely in the groove without excessive force. |
A: This Industrial O-Ring, Buna-N is manufactured from Titanium Grade 5.
A: Hydraulic Systems, Aerospace Fluid Connectors, Marine Sealing Applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||